Inside and outside the installation of joints as follows:

1, the protective cover installed on the shaft.

2, the correct installation disc seat.

3, the internal pressure into the drive shaft universal joints. The disc seat fit, within the star wheel diameter (spline teeth) chamfer on the shaft must be oriented by the shoulder.

4, installation of the spring lock ring.

5, mounted on the outside joints.

6, in the joints when installed on the dust cover, dust cover, often being squeezed. Dust thus generated within a vacuum, it will produce a vehicle in the absorption of the crease. So after installing the dust cover small diameter, point to charge a little gas, so that the pressure balance, no folds.

7, with the clamps grip dust cover. Pliers used in new model V.A.G1275.